The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

PanelDeland · 01-31-2009, 07:53 PM

Post a pic or you can look at the motor mounts.The 292 are offset (one is further forward then the other).The other way to tell is by the height of the lifter covers on the passenger side of the engine the 250 covers are 4 in tall the 292 are 6 in,

01-31-2009, 07:53 PM	#2
PanelDeland I am a Referee of life. Join Date: Jun 2000 Location: Greensboro N.C. Posts: 13,992	Re: engine? Post a pic or you can look at the motor mounts.The 292 are offset (one is further forward then the other).The other way to tell is by the height of the lifter covers on the passenger side of the engine the 250 covers are 4 in tall the 292 are 6 in, __________________ The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil"