the last clutch i i repalced lasted a year becuase i did not resurface my flywheel>
1. Block the wheels
2 disconnect the battery
3.remove the driveshaft
4. remove the starter
5. remove 4 bolts holding the transmission tot eh bellhousing
6. support then engine (i do this with a block of wood and floor jack
7.remove 10 bolts holding bell houseing(8 bolts to engine,2 thought the crossmenber)
8.Remove clutch
( remove and replece polit bushing
9. reinstall resurfaced flywheeel.
10. reverse all above step
i have done this in as little as 3 hours