The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**passthebuck** · 02-04-2009, 11:51 PM

You can also cut the "x" in the carpet & place a piece of tubing into the x thats bigger than the hole to be drilled. Drill down through the space created by the tubing. Remove tubing & voila.

02-04-2009, 11:51 PM	#9
passthebuck Sisyphus was my mentor! Join Date: Sep 2002 Location: Carleton Place, Ontario CANADA Posts: 984	Re: Drilling through carpet You can also cut the "x" in the carpet & place a piece of tubing into the x thats bigger than the hole to be drilled. Drill down through the space created by the tubing. Remove tubing & voila. __________________ passthebuck #5642 -TWO 1967 GMC 910's. One with L6/3-on-the tree and the other with 355 w/435hp & a 700r4. -a 2013 Honda Civic as my "sensible" car