The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

cereal_killer44 · 02-06-2009, 06:25 PM

if your going to do a bed cut. i would keep the piece you cut out so if you decide you want to put it back to stock you can just reweld the piece back into place. just my .02c on that. as for the box leaking just make sure you seal the port up really well with a rubber seal of some sort and make the box is screwed down to the bed so it wont move around and mess up the seal to the cab.

02-06-2009, 06:25 PM	#7
cereal_killer44 Registered User Join Date: Dec 2008 Location: Fort Worth, Texas Posts: 5	Re: subwoofer box in bed if your going to do a bed cut. i would keep the piece you cut out so if you decide you want to put it back to stock you can just reweld the piece back into place. just my .02c on that. as for the box leaking just make sure you seal the port up really well with a rubber seal of some sort and make the box is screwed down to the bed so it wont move around and mess up the seal to the cab.