|
Re: wheel bearing lock nuts
No washer in there.
The wheel bearing should have .000 to .005 end play.
Or i torque it to 35ftlb while spinning the wheel. Then back off 1/4 turn. Then tighten till the in and out play just goes away.
__________________
72 k/10 short wideside
72 k/5 Blazer
72 K/5 Blazer - obstacle course racer
72 custom/10 8' bed
70 K/5 Blazer
67 C-30 GMC Flat bed
86 GMC K2500 Plow Truck
85 GMC K3500
84 M1008
85 M1008
77 G30 Motor Home
72 Sears 12hp Tractor
Glenmoore, Pennsylvania
|