The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

PBFAB.COM · 02-07-2009, 09:18 PM

The factory gas tanks sit just below the frame, and also the driver's side lower frame rail has a "kink" in it where the catalytic converter used to be. Also, with the factory lowers, bag plate,and SlamBag it will keep you just off the ground. Make sure it's not the tanks and frame on the driver's side first. If those aren't the issue, swap the Slambag for a Firestone it will get you that extra inch.

02-07-2009, 09:18 PM	#10
PBFAB.COM Senior Member Join Date: Dec 2003 Location: Mesa,Az Posts: 3,981	Re: Front won't lay??? The factory gas tanks sit just below the frame, and also the driver's side lower frame rail has a "kink" in it where the catalytic converter used to be. Also, with the factory lowers, bag plate,and SlamBag it will keep you just off the ground. Make sure it's not the tanks and frame on the driver's side first. If those aren't the issue, swap the Slambag for a Firestone it will get you that extra inch. __________________ www.PorterbuiltFabrication.com Phone: 480-297-2621 E-mail: sales@pbfab.com Find us on FaceBook under Porterbuilt Fabrication Specializing in Chassis and Suspension Components for your Classic Chevrolet Truck. We offer components from the following manufacturers: Porterbuilt Accuair Ridetech (Air Ride Technologies) Air Lift Wilwood Intro Unisteer ECE Gotta Show Air Lift Borgeson CPP Supporting this forum since 2003!