The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Engine Analyzer and Drag Analyzer.. Willing to put your info in.

jgh64pkup · 02-08-2009, 01:46 PM

engine data
1979 350
bore: 4.060
stroke: 3.480
factory tolerances
belt driven water pump
electric fan

Head data
1967 283 powerpack heads slightly ported
Intake: 1.72
Exhaust: 1.50
head casting # 3884520
compression: 10.65 to1
intake http://www.jegs.com/i/Edelbrock/350/7101/10002/-1
Carb: 600 cfm holley vacuum secondaries 4160 series

header data
1 5/8 primary tubes 32 inches long 3 inch collector

cam data
http://cranecams.com/?show=browsePar...tType=camshaft
vehicle data
1964 chevy c10 shortbed
says 3400 on title not sure on aproximate weight
115 inch wheelbase
th350
2500 stall converter
3.73 gears
12 bolt detroit locker
30x9x15 m/t et drags
http://www.jegs.com/i/Mickey+Thompson/672/3066/10002/-1

thanks

02-08-2009, 01:46 PM	#117
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: Engine Analyzer and Drag Analyzer.. Willing to put your info in. engine data 1979 350 bore: 4.060 stroke: 3.480 factory tolerances belt driven water pump electric fan Head data 1967 283 powerpack heads slightly ported Intake: 1.72 Exhaust: 1.50 head casting # 3884520 compression: 10.65 to1 intake http://www.jegs.com/i/Edelbrock/350/7101/10002/-1 Carb: 600 cfm holley vacuum secondaries 4160 series header data 1 5/8 primary tubes 32 inches long 3 inch collector cam data http://cranecams.com/?show=browsePar...tType=camshaft vehicle data 1964 chevy c10 shortbed says 3400 on title not sure on aproximate weight 115 inch wheelbase th350 2500 stall converter 3.73 gears 12 bolt detroit locker 30x9x15 m/t et drags http://www.jegs.com/i/Mickey+Thompson/672/3066/10002/-1 thanks __________________ Gage 1967 C10 Shortbed Stepside Last edited by jgh64pkup; 02-09-2009 at 04:40 PM.