The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - A daily driver, fixer-upper thread

Lugnut64052 · 02-09-2009, 02:55 AM

Couldn't use the fan off the '95. It was about 19 inches across, and the shrouds on our trucks are for an 18 inch. Couldn't use the original fan either because the serpentine drive uses a reverse rotation water pump and fan.

Local NAPA store coughed up this fan. 18 inch reverse rotation. It was natural aluminum out of the box, so I rattle canned it black. Had to drill out the holes to accommodate the whopping 10mm bolts the clutch took.

02-09-2009, 02:55 AM	#8
Lugnut64052 Middle-aged Curmudgeon Join Date: Jun 2008 Location: Independence, MO Posts: 753	Re: A daily driver, fixer-upper thread Couldn't use the fan off the '95. It was about 19 inches across, and the shrouds on our trucks are for an 18 inch. Couldn't use the original fan either because the serpentine drive uses a reverse rotation water pump and fan. Local NAPA store coughed up this fan. 18 inch reverse rotation. It was natural aluminum out of the box, so I rattle canned it black. Had to drill out the holes to accommodate the whopping 10mm bolts the clutch took. Attached Images __________________ Bret Check out the site's Truck Tech FAQ. Be a site supporter. My more-or-less pathetic build thread. Board members I've met: ------------------------------ Longhorn Man Dieselwrencher jholley big mike71