The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**mr48chev** · 02-09-2009, 09:02 PM

When you pull the wheel look and see if there are a couple of screw heads between the studs. If so unscrew the screws and then take the drums off. If the drum appears to be fastened on from behind the flange that the wheel bolts to you will have to pull the axles first then pull the hub and drum as an assembly.

02-09-2009, 09:02 PM	#3
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,824	Re: '69 3/4 ton brake job When you pull the wheel look and see if there are a couple of screw heads between the studs. If so unscrew the screws and then take the drums off. If the drum appears to be fastened on from behind the flange that the wheel bolts to you will have to pull the axles first then pull the hub and drum as an assembly.