The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

pseigmund · 02-13-2009, 01:12 PM

Hi,

I attached some pictures of my 70 chevy crossmember with a 6 cylinder (292). I am not sure if the small block crossmember is the same. I know the frame stand part of the mounts are different. JC Whitneys and other places sell after market tubular crossmembers for small blocks. 2X4's didn't use a crossmember mount set up because the suspension is different (coil springs vs. leaf springs). I will take a look at my c-10 with a small block in it this weekend and let you know if they are different (it is at a friend's house).

Good luck,
Pete

02-13-2009, 01:12 PM	#3
pseigmund Registered User Join Date: Feb 2009 Location: Whitefish, MT Posts: 27	Re: engine mounts Hi, I attached some pictures of my 70 chevy crossmember with a 6 cylinder (292). I am not sure if the small block crossmember is the same. I know the frame stand part of the mounts are different. JC Whitneys and other places sell after market tubular crossmembers for small blocks. 2X4's didn't use a crossmember mount set up because the suspension is different (coil springs vs. leaf springs). I will take a look at my c-10 with a small block in it this weekend and let you know if they are different (it is at a friend's house). Good luck, Pete Attached Images