|
Re: Best Way To Cut Hole In Bed
My advice on cuttimg would be to use a hole saw.Especially if you need a round hole.Even if you need some other shape a hole saw will give you a good place to start what you need.
As far as measuring I can only say measure,measure,measure and then measure again.Then stop and measure again.Measure from the top and the bottom and try to determine if the marks match.Then drill from the bottom(if you have a better veiw to make sure it's right)with a small bit.You can then use the hole for a guide to drill the main hole.
Don't forget to check for fuel,brake, or any other kind of lines that may be under the floor.
__________________
The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion.
You can't fix stupid,not even with duct tape.
"My appearance is due to the fact that "GOD" does punish you for having too much fun!"
Barrett-Jackson has perfected alchemy,they make rust into gold!
"You can lead a horse to water but you can't saddle a duck"
"Cleverly disguised as a 'Responsible Adult'
"Sometimes your Knight in shining armor is just a retard in tinfoil"
|