Quote:
Originally Posted by my67chevytruck
mount the gas tank. get a piece of hose the same diameter you are going to use and install in on the gastank (trim it enough to flush with the bottom of the truck bed, and mark around the hose with a sharpie, use that as your template...
|
+1 Great suggestion. you can drill a pilot hole in the center of the circle you marked and the use the correct size hole saw from the top or use that as the center to mark for cutting a hole with another tool.
The filler in the floor might be ok for a show only truck but I can say from experience that it gets to be a royal pain in the tailfeathers if you actually use the truck as a truck.