The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

ProStreet71 · 02-18-2009, 10:04 AM

Thanks guy's. I am going to remove the oil galley plugs because i do drive this engine on the street from time to time. I dont want to starve my roller lifters for oil. As far as the steam holes i will leave them as is, because i have driven this engine several times on the street and have not had any cooling issues at all. The engine is studded in the mains and the heads. i have just removed my current motown 220 heads and replacing them with the AFR 227's.

02-18-2009, 10:04 AM	#7
ProStreet71 Registered User Join Date: Sep 2008 Location: Huntingdon,TN Posts: 95	Re: 400 Block Thanks guy's. I am going to remove the oil galley plugs because i do drive this engine on the street from time to time. I dont want to starve my roller lifters for oil. As far as the steam holes i will leave them as is, because i have driven this engine several times on the street and have not had any cooling issues at all. The engine is studded in the mains and the heads. i have just removed my current motown 220 heads and replacing them with the AFR 227's.