Quote:
Originally Posted by jorgensensc
Okay! Awesome I see now! Okay, so in your opinion,
A: Can these areas be modifies to gain the distance from torsion box to torsion box?
B: If not, if the body sat higher to avoid hitting these braces, how much lower would the frame need to be to clear them? It looks minimal, like 1/2" or so. Is that correct?
Thanks again for all of your help!
Shawn
|
A: I don't believe it, the torsion rods run to the inside as it attaches in the front of the torsion box.
B: The first drop steps 2-3/4"s from the bottom of the floor & to the bottom of the torsion box, it's 6-1/4"s from the tub floor.
Quote:
Originally Posted by jorgensensc
So how wide is the blazer frame from outside to outside frame rail in between the torsion boxes?
|
Measuring the frame from directly below the body mount bolts:
Front is 33-1/4"s
Rear is 34"s
Torsion boxes inside/inside.
From front at the narrowest point before it jogs is 43-1/2"s
From the furthest point rearward of the torsion box is 51"s
**Please keep in mind that all these old trucks my not measure up exactly the same.
