The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

sbrban · 03-10-2003, 06:03 PM

It's been a while.....pull the latch out of 3rd door,clean up & lubricate. look at latch while pulling on lock linkage-thats the tab you use.drill 3/16 hole in tab so you can mount actuator rod vertically using a linkage clip(like on most all gm latches).take your time to make the angles non existant(will work a lot smoother).hard to explain but is easy to do.

03-10-2003, 06:03 PM	#8
sbrban Registered User Join Date: Sep 2002 Location: Iowa Posts: 236	It's been a while.....pull the latch out of 3rd door,clean up & lubricate. look at latch while pulling on lock linkage-thats the tab you use.drill 3/16 hole in tab so you can mount actuator rod vertically using a linkage clip(like on most all gm latches).take your time to make the angles non existant(will work a lot smoother).hard to explain but is easy to do. __________________ you never have too many suburbans....