The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

kizer · 02-25-2009, 03:13 PM

Yeah, but when I tried a saw zaw it was hoping all over the place and since the cut is only 1/2 inch or so deep I had an issue guiding it and when I did get it to fit it was trying to cut to deep into the 90degree bend beyond the lower support and you have to hold it tight and at an angle forward to keep from cutting the bed side.

All I know is if anybody can do it with a Saw Zaw they are more or a man than I'll ever be. Well at Saw Zawing hahahahah.

02-25-2009, 03:13 PM	#23
kizer Its Deja Vu time again Join Date: Aug 2008 Location: Marysville, North of Seattle WA Posts: 815	Re: Wrong year bed! Yeah, but when I tried a saw zaw it was hoping all over the place and since the cut is only 1/2 inch or so deep I had an issue guiding it and when I did get it to fit it was trying to cut to deep into the 90degree bend beyond the lower support and you have to hold it tight and at an angle forward to keep from cutting the bed side. All I know is if anybody can do it with a Saw Zaw they are more or a man than I'll ever be. Well at Saw Zawing hahahahah. __________________ Its not pretty but its mine to figure out. The build / The Photos / Build Diary Last edited by kizer; 02-25-2009 at 03:13 PM.