The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

matthew20061 · 02-28-2009, 04:40 PM

I mounted up the customized 72 gas pedal and drilled a new hole though the firewall to install the cable. Then installed the cable and connected it up to the gas pedal. It just so happens that the s-10 cable was the same length and just fit right in. Now I can press the pedal to the floor and the engine opens up all the way, let off and it goes back to idle, this just amazed me that I didn't have to do any modifications to the setup.

02-28-2009, 04:40 PM	#101
matthew20061 69' Chevy Stepside Join Date: Mar 2008 Location: Anchorage, Ak Posts: 526	Re: 1969 Chevy Stepside Restoration/Build up I mounted up the customized 72 gas pedal and drilled a new hole though the firewall to install the cable. Then installed the cable and connected it up to the gas pedal. It just so happens that the s-10 cable was the same length and just fit right in. Now I can press the pedal to the floor and the engine opens up all the way, let off and it goes back to idle, this just amazed me that I didn't have to do any modifications to the setup. __________________ -Matthew -69' Chevy Custom/10 Shortbed Stepside 2WD "Copperhead" - Restored, 6.0L LQ9 Built. L92 Heads and LS3 Intake with Comp Cam 223/231 .610/.617 112 LSA, 4L60E with Shift Kit and Circle-D 3200 Stall Converter ~Build Thread -1957 Chevy BelAir 2 Door Post Sedan, Full Frame off Restoration done myself - 6.0L with T56 six speed -1957 Chevy BelAir 2 Door Post Sedan - Nearly rust free AK car, Project in the waiting -2003' Chevy Silverado SS AWD 6.0L! - Daily Driver