The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Longhorn Man · 03-05-2009, 11:09 PM

you'll want to use epoxy primer to keep it from rusting, and it'll cost more than a cheap paint job.
I'd just leave it alone till you can do it all correctly.
Navel jelly is good stuff, but if you don't get it all off the metal, off every nook and cranny, it will cause trouble down the road. On an assembled vehicle, you are better off just going with sand paper.

03-05-2009, 11:09 PM	#2
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Re: looked at my future 72' you'll want to use epoxy primer to keep it from rusting, and it'll cost more than a cheap paint job. I'd just leave it alone till you can do it all correctly. Navel jelly is good stuff, but if you don't get it all off the metal, off every nook and cranny, it will cause trouble down the road. On an assembled vehicle, you are better off just going with sand paper.