The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Andy4639 · 03-14-2009, 10:13 PM

I wouldn't see why not. I have the helper air bags on mine. I turned it upside down to make it fit better. I also have a set of the spacers too. I asked about the size of them in another thread and was told 2" for them so I had them cut at 2" thick, they must have meant 2" total because they were way off at 2" per side so I had them cut in half.

03-14-2009, 10:13 PM	#22
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: sway bar question I wouldn't see why not. I have the helper air bags on mine. I turned it upside down to make it fit better. I also have a set of the spacers too. I asked about the size of them in another thread and was told 2" for them so I had them cut at 2" thick, they must have meant 2" total because they were way off at 2" per side so I had them cut in half. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.