[68 short step]

bit more progress, i got the door fitting the best it could.....the gaps sucked (aftermarket door), expecially around the window frame.....it was too tight on the upper aft part of the window opening, then it tappered to about a 1/4" gap in the middle, and then went to about a 1/32" at the upper front.......what i had to do was cut the door at the front door piller, then remove 1/8" of material, pull the front frame back....that took care of the front piller gap....on the rest of the window frame i pushed the rear of the window frame forward, then shaves off about 1/16" to get the gaps good......