The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

STOCKISH · 03-17-2009, 09:33 AM

I am putting a tank from a Burb (73-87) in my 72 Super. Does it need to be flush with the top of the frame in the rear or do I have a couple inches to play with. Any pics of how high your tank sits above the frame (ones that clear) would be especially helpful. Also does the tank need to stop at the rear even with the frame or is it ok if it hangs out some? Thanks

03-17-2009, 09:33 AM	#1
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Blazer/ Suburban tank I am putting a tank from a Burb (73-87) in my 72 Super. Does it need to be flush with the top of the frame in the rear or do I have a couple inches to play with. Any pics of how high your tank sits above the frame (ones that clear) would be especially helpful. Also does the tank need to stop at the rear even with the frame or is it ok if it hangs out some? Thanks __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.