The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**lolife99** · 03-22-2009, 08:31 AM

No notch required with a 6" rear drop. Just install 6" drop springs
Use 2.5" drop spindles and a 2 or 3 inch drop spring. (4.5 or 5.5 inch front drop)

This will get the height correct,... but you still need to buy a few things.
1. Buy a good set of drop shocks.
2. Next you will need a set of shock relocators in the rear.
3. Buy an adjustable rear track bar. (panhard bar) this will allow you to re-center the rearend after you lower it.

Look at ECE (Early Classic Enterprises),... they should have everything you need.

03-22-2009, 08:31 AM	#2
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,717	Re: wondering what it takes to get 5/6 drop. No notch required with a 6" rear drop. Just install 6" drop springs Use 2.5" drop spindles and a 2 or 3 inch drop spring. (4.5 or 5.5 inch front drop) This will get the height correct,... but you still need to buy a few things. 1. Buy a good set of drop shocks. 2. Next you will need a set of shock relocators in the rear. 3. Buy an adjustable rear track bar. (panhard bar) this will allow you to re-center the rearend after you lower it. Look at ECE (Early Classic Enterprises),... they should have everything you need. __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823 Last edited by lolife99; 03-22-2009 at 09:04 AM.