Re: Weiand or Edelbrock intake for BB?
Per Edelbrocks Recomendation
Part Number: EDL-2162
Cam Style: Hydraulic flat tappet
Basic Operating RPM Range: Idle-5,500
Intake Duration at 050 inch Lift: 218
Exhaust Duration at 050 inch Lift: 228
Duration at 050 inch Lift: 218 int./228 exh.
Advertised Intake Duration: 292
Advertised Exhaust Duration: 302
Advertised Duration: 292 int./302 exh.
Intake Valve Lift with Factory Rocker Arm Ratio: 0.500 in.
Exhaust Valve Lift with Factory Rocker Arm Ratio: 0.500 in.
Valve Lift with Factory Rocker Arm Ratio: 0.500 int./0.500 exh. lift
Lobe Separation (degrees): 114
Intake Valve Lash: 0.000 in.
Exhaust Valve Lash: 0.000 in.
Computer-Controlled Compatible: No
Lifters Included: Yes
Lifter Style: Hydraulic flat tappet
This is still my daily driver so and I am not getting into head work etc.
So my choices for intakes 1 from there tech support and 1 from weiand.
Edelbrock
Part Number: EDL-2161
Engine Block Style: Stock/OEM standard deck
Carburetor Quantity: Single
Intake Style: Dual plane
Basic Operating RPM Range: Idle-5,500
Intake Finish: Natural
Intake Material: Aluminum
EGR: No
and
Weiand
Part Number: WND-8123
Engine Block Style: Stock/OEM standard deck
Carburetor Quantity: Single
Intake Style: Dual plane
Basic Operating RPM Range: Idle-5,500
Intake Finish: Natural
Intake Material: Aluminum
EGR: No
Thanks for the input!
|