The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

pseigmund · 03-29-2009, 09:06 PM

Thanks for the reply. The oil pressure gauge bolts in lower down on the block, passanger's side on the motor I have. The bolt in the back of the block is 3/8 or 7/16 in diameter so it is about the same size as the head bolts.

03-29-2009, 09:06 PM	#3
pseigmund Registered User Join Date: Feb 2009 Location: Whitefish, MT Posts: 27	Re: 292 cylinder head mystery bolt Thanks for the reply. The oil pressure gauge bolts in lower down on the block, passanger's side on the motor I have. The bolt in the back of the block is 3/8 or 7/16 in diameter so it is about the same size as the head bolts.