The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Woody · 04-08-2009, 07:34 AM

Welcome to the best BB in the world!

#1A: Seat does not fold forward, some did but most did not. If you look you can see where it is bolted on the sides.

#1B: There are several options on the seat. Springs and foam can be replaced & new cover installed. Or a good seat out of later model cars/trucks can be installed fairly easy & may be cheaper than re-doing an old seat.

#2: I think they have nuts on the back of them. You can reach the front post (of the C10 Emblem) from inside the hood, reaching in behind the inner wheel well (not easy!), otherwise you have to remove the fender. Also you may be able to get them with the small keeper that you put in the hole and slide the post into.

#3 Sorry no pics...

04-08-2009, 07:34 AM	#3
Woody Registered User Join Date: Feb 2000 Location: Georgetown, KY, USA Posts: 631	Re: New Guy with dumb questions Welcome to the best BB in the world! #1A: Seat does not fold forward, some did but most did not. If you look you can see where it is bolted on the sides. #1B: There are several options on the seat. Springs and foam can be replaced & new cover installed. Or a good seat out of later model cars/trucks can be installed fairly easy & may be cheaper than re-doing an old seat. #2: I think they have nuts on the back of them. You can reach the front post (of the C10 Emblem) from inside the hood, reaching in behind the inner wheel well (not easy!), otherwise you have to remove the fender. Also you may be able to get them with the small keeper that you put in the hole and slide the post into. #3 Sorry no pics...