The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - putting drop blocks on and cant get the nut off the u bolt..

chas350 · 04-09-2009, 06:43 PM

Are you using a good breaker bar with a piece of pipe over it? that with heat should take care of it as long as the socket does not slip (nuts not rounded over) otherwise you must cut them.

chas

04-09-2009, 06:43 PM	#9
chas350 Registered User Join Date: Mar 2007 Location: Connecticut Posts: 581	Re: putting drop blocks on and cant get the nut off the u bolt.. Are you using a good breaker bar with a piece of pipe over it? that with heat should take care of it as long as the socket does not slip (nuts not rounded over) otherwise you must cut them. chas __________________ "I'll Procrastinate Tomorrow" quote by LEEVON 71 K10 long fleet (sons truck) new 370hp 355, sm465 np205, 3.73's 33's 70 K20 long fleet 98 G3500 work van