The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

JimKshortstep4x4 · 04-09-2009, 07:06 PM

The difference in the tilt vs non tilt is in the turn signal cancelling cam. On the tilt there is a spring that goes up into the cancelling cam. If you try to put an adapter on with the cancelling cam from a non tilt column there is not enough room for the spring which stops the adapter from going on.

We ordered the tilt adapter for my son's Burb and it fits great.

Jim

04-09-2009, 07:06 PM	#4
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	Re: steering wheel adapter The difference in the tilt vs non tilt is in the turn signal cancelling cam. On the tilt there is a spring that goes up into the cancelling cam. If you try to put an adapter on with the cancelling cam from a non tilt column there is not enough room for the spring which stops the adapter from going on. We ordered the tilt adapter for my son's Burb and it fits great. Jim __________________ 1971 Shortbox step side 4x4, 350 sbc, 3:07 rear end 1965 Impala SS 400 sbc, Muncie rock crusher 1966 Impala SS 396 bbc, TH 400 1969 El Camino, 350 sbc, TH 350 1971 Snowplow built on a Blazer frame 1972 GMC Short bed, stepside, TH 400, 427 BBC Last edited by JimKshortstep4x4; 07-14-2009 at 12:52 PM.