|
Re: Best wiring solution 70 Blazer
Gotta agree with Wes, I just did my wiring with M&H, and everything was plug and play. They modified mine to run an HEI and electric choke, all connections were factory ones. The engine harness is about 100.00, but be careful when you take it apart at the firewall/fuseblock connection. You can break it, if you don't take it apart right...
The headlite harness is about 300.00, mine was modified with the high/low beam relays. Here again, everything was plug and play, with factory connections. Quality stuff, and the guys there will answer all your questions. If you go this route, check the locations of the wires between the old and new harness just to be sure that no mistakes were made.
__________________
Semper Fi...Uncle Sam, you da man
All parts offered to help are free, unless otherwise noted
Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training
SAFETY FIRST
AS usual, off topic
They say your mind goes second, can't remember the first
Jim
Last edited by jaros44sr; 04-14-2009 at 09:04 PM.
|