The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

hotrodrookie · 04-18-2009, 07:58 PM

Yea, I slipped the camaro clip undernieth the frame. I dont have the measurment on me and im out of town right now but I learned that fitting up everything was so important the hard way. The second pic shows the wheelbase was 2 inched too far. I felt very stupid and still kick myself for it. I step cut the c channel truck frame in between the front and rear cab mounts and took 2 inches out of the frame. Made sure everything lined up and was straight, then i tig welded the frame back together. The last pic shows some boxing and how i had to move the front cab mounts forward.

04-18-2009, 07:58 PM	#29
hotrodrookie Registered User Join Date: Sep 2008 Location: Sacramento Posts: 425	Re: If u know about camaro sub ,help me Yea, I slipped the camaro clip undernieth the frame. I dont have the measurment on me and im out of town right now but I learned that fitting up everything was so important the hard way. The second pic shows the wheelbase was 2 inched too far. I felt very stupid and still kick myself for it. I step cut the c channel truck frame in between the front and rear cab mounts and took 2 inches out of the frame. Made sure everything lined up and was straight, then i tig welded the frame back together. The last pic shows some boxing and how i had to move the front cab mounts forward.