The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

bsgmcc20 · 04-25-2009, 10:54 PM

Well since you dont have a motor or Tranny. Check out your body mounts. Check sheet metal bolts. make sure your not going to loose a fender at 60 mph when you get rolling. simple parts to replace since you dont have the motor and tranny weight. And then the axle could use a once over.

just a start and I know the guys here will give you alot of good advice.

Nice truck stock interior minus that after market radio.

On a side note: keep those old plates it makes these old trucks not having the crappy white ones added just takes the look away.

04-25-2009, 10:54 PM	#2
bsgmcc20 Im afraid of purple hangers.. Join Date: Oct 2008 Location: Central Cal Posts: 108	Re: new guy from san diego Well since you dont have a motor or Tranny. Check out your body mounts. Check sheet metal bolts. make sure your not going to loose a fender at 60 mph when you get rolling. simple parts to replace since you dont have the motor and tranny weight. And then the axle could use a once over. just a start and I know the guys here will give you alot of good advice. Nice truck stock interior minus that after market radio. On a side note: keep those old plates it makes these old trucks not having the crappy white ones added just takes the look away. Last edited by bsgmcc20; 04-25-2009 at 10:55 PM.