Re: electrical belt squealing problemos
Quote:
Originally Posted by VetteVet
At first I thought you had fried a fusible link, but if you were able to bump start the truck then you had power to the fuse panel and to the key switch. The ignition comes off the key switch as does the starter solenoid power wire (purple). Did you mean that you weren't able to start the truck with the key switch? If not then either you have no power to the solenoid via the purple wire or you have fried the solenoid or worse the starter.
Try jumping the starter solenoid with a screwdriver, short the battery cable post to the S terminal on the solenoid where the purple wire should be connected. Make sure the truck is out of gear and the wheels are blocked!!!!!!!!. If the starter turns then the problem is in the purple wire from the key switch. If it doesn't then the solenoid is bad. IF you hear a loud click then the solenoid is probably good and the starter is bad.
Here's a pic to help.
|
what is that blue wire going to the block? ive never seen that
__________________
'72 k10 lwb 454, th400, 205, d44ft, 12b rear, 4in skyjacker, 35x12.5-15 superswampers, 4.56, blazer tank. painless wiring harness
'98 dodge 3500 12v 5sp 4x4. the truck that actually runs
Quote:
Originally Posted by prostreetC-10
I think the best and cheapest performance mod is to have someone that knows what the hell they are doing perform a tuneup on said vehicle.
|
|