The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Lowering Block Kit- Will this work

MT71c-10 · 04-30-2009, 08:36 PM

I don't think those are going to work. It say's for leaf springs, it will have locating pins that won't sit right with the axle mounts. The blocks you need are flat bar stock with 2 holes drilled in them. See my example below. These I made to fit mine. Also check in the FAQ's I know there is a post in there on how to build them. Cpp, EEC, Perhaps Bell Tech may sell the right kits.

04-30-2009, 08:36 PM	#3
MT71c-10 Too many toys,not enough money Join Date: May 2008 Location: Bozeman,MT Posts: 237	Re: Lowering Block Kit- Will this work I don't think those are going to work. It say's for leaf springs, it will have locating pins that won't sit right with the axle mounts. The blocks you need are flat bar stock with 2 holes drilled in them. See my example below. These I made to fit mine. Also check in the FAQ's I know there is a post in there on how to build them. Cpp, EEC, Perhaps Bell Tech may sell the right kits. Attached Images Last edited by MT71c-10; 04-30-2009 at 08:39 PM.