Quote:
Originally Posted by gringoloco
I realized my post was a bit vague. I was speaking of the four-link. My Blazer is already step notched. If the brackets locate off the forward spring hanger holes, then it should align perfectly, since the Blazers and trucks share rear spring dimensions.
|
Yes, they do bolt directly into the spring hanger bolts.
The only thing I would need to change is the angle of the forward mounting tabs (they sit at about a 4 degree angle due to the frame taper on the 2WD). Since the 4WD is a straight rail design, I would just need to eliminate the angle on the mount. It's a pretty simple change for me to make. If you are interested, I would just mod a bracket and send it out so you could test fit and verify.
Not sure if you would have to modify your floor for front upper bar clearance.