|
Re: bed mount question - bent frame from towing?
if one is really stuck for those insulators there should be 2 for every mount- 1 above the frame and 1 under. the one under will not of had the strain off the body sitting on it so should still be usable to use as the top one for a while.
other option is to get some of that hard black rubber 5/8" and cut some out to the sizes mentioned above. the steel backing plate that was bonded to the orig is .100" thick. noe that old backing plate may fall off the old insulator so use that..
the other option is to find a good plastic shop that may have the right thickness of polyurethane or urethane of the type that they use for s/absorbers and other suspension pats and make them out of that. total thickness o.720"
ron
|