View Single Post
Old 05-04-2009, 09:04 AM   #12
GCncsuHD
Charlie Daniels w/ a Tq Wrench
 
GCncsuHD's Avatar
 
Join Date: May 2009
Location: Statesville, NC
Posts: 1,570
Re: Anyone runing a HD hood on 1/2 tone?

Quote:
Originally Posted by DirtyLarry View Post
Nothing special needs to be done. The 2001 & 2002 HD hoods fit right on to a 1999 through 2002 non-HD without any modifications to the latches, grill or bumper.

The raised HD style hood (both HD and non-HD) from 2005 & 2006 also fit 2003-2004 non-HD without any modifications as well.

To make things confusing, 2003 & 2004 HD hoods were the same as non-HD’s (low hoods) while 2005 and 2006 HD and non-HD had the raised hood.
You are right about the 01-02 Chevy hood fitting on to 99-02 Chevy's with no modifications.

BUT you are wrong about the newer hoods. 2003 and 2004 there was absolutely no difference between HD and non HD hoods and grilles. The only difference was the taller bumper cap on the HDs to overcome the 2" body raise.

2005 The HD got the taller HD grille, and a different grille.. While the hood will fit onto 03-05 non HDs it will not fit the grille properly, although the HD grille can also be swapped to make it work.

In 06 and 07 the half tons also got the same grille and hood as the 05 HD.

Quote:
Originally Posted by tvblazer78 View Post
Found one more, this is my front end. Looks killer..
There was never a GMC HD hood made. All 01-07 GMC 2500HDs shared the exact same hood as the half tons. BUT, the Chevy hood will bolt right on, and match the grille BUT it will not match the headlights. You must cut out the shape of the headlights into the front of the hood, and leave a little extra material over to bend over and weld in the seam. If you are really interested in the swap, a member Bgray on gmfullsize.com did the swap and it came out amazing, I always wanted to do the swap if I ever got the $$ to do a full repaint on my 03 GMC.

But also on the topic of GMCs, a 03-07 GMC grille will fit right onto the older 99-02, and updates the look of the front end in my opinion.

Also in the case of a 99-02 truck, if you install a 2" body lift and don't use the front bumper raise brackets, the HD grille and bumper cap fit right on.


Last edited by GCncsuHD; 05-04-2009 at 09:08 AM.
GCncsuHD is offline   Reply With Quote