The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**old Rusty C10** · 05-05-2009, 09:55 PM

could be a multitude of things but first make sure you have good ground on the actuator.. then make sure that the part of the actuator that moves up and down is nice and clean and you may wanna shoot some WD40 on it to make sure that its lubed and if that doesnt work make sure there is power to the switch and good ground and power there then if that doesnt work you are looking at the actuator itself

05-05-2009, 09:55 PM	#2
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,349	Re: Driver side door doesn't lock... could be a multitude of things but first make sure you have good ground on the actuator.. then make sure that the part of the actuator that moves up and down is nice and clean and you may wanna shoot some WD40 on it to make sure that its lubed and if that doesnt work make sure there is power to the switch and good ground and power there then if that doesnt work you are looking at the actuator itself __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!