The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Hawker7 · 05-07-2009, 08:01 AM

I took the valve off, and was able to tighten it enough so now it does not leak. The problem now is the back brakes don't work at all. Everything is new except for the Proportioning Valve so I'm not sure what the problem could be. I was able to gravity bleed the lines, so I know fluid is getting back there. I also checked the pin in the valve, and it dosn't seem to be sticking out. The front brakes do seem to work though.

05-07-2009, 08:01 AM	#5
Hawker7 Registered User Join Date: Jan 2008 Location: Raleigh, NC Posts: 321	Re: Proportioning Valve I took the valve off, and was able to tighten it enough so now it does not leak. The problem now is the back brakes don't work at all. Everything is new except for the Proportioning Valve so I'm not sure what the problem could be. I was able to gravity bleed the lines, so I know fluid is getting back there. I also checked the pin in the valve, and it dosn't seem to be sticking out. The front brakes do seem to work though.