The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

colohusker · 05-10-2009, 12:50 AM

Okay, finally finding time to work on the old beast. Upgraded to an HEI, swapped trannies, and rebuilt and cleaned the Qjet carb. When rebuilding the carb, I noticed the module in the red rectangle in the picture, and it was hooked up to the electric wires, but not the vacuumn. I don't know what it's for, my guess is it was for a cruise control of some kind, but don't know if it's original or something a PO put on. If it is for a cruise control, there are no other components of the system in place that I know of.

So, all you truck gurus out there, help enlighten me on what this is?

05-10-2009, 12:50 AM	#1
colohusker Registered User Join Date: Apr 2002 Location: Longmont, CO Posts: 436	Unknown carb part Okay, finally finding time to work on the old beast. Upgraded to an HEI, swapped trannies, and rebuilt and cleaned the Qjet carb. When rebuilding the carb, I noticed the module in the red rectangle in the picture, and it was hooked up to the electric wires, but not the vacuumn. I don't know what it's for, my guess is it was for a cruise control of some kind, but don't know if it's original or something a PO put on. If it is for a cruise control, there are no other components of the system in place that I know of. So, all you truck gurus out there, help enlighten me on what this is? Attached Images __________________ ------------------------------------------------ I say it's only money, my wife says it's only a truck.... '71 C10 Deluxe, factory ac, ps, pb, should be done by 2102 Longmont, CO husker95@hotmail.com