[gcburdic]

Okay weircc,

here's a couple pics of the driver side headlight, parklight/blinker, and side maker (not sure if you are running one??)...Let me know if you need anymore...it's just a short walk back out to the garage....for the plug that goes through the rad. support, I cut and stored the brown wire and connected the 926 t the purple and the 927 to the blue....(see pic)
By the way, a couple things to keep in mind while doing it that I learned....plan out where you want to put the "maxi-fuse" (someplace easy to reach, but hidden if you are looking for the clean look), also, I had to install a diode inline with the alternator because the engine wouldn't shut down when the ignition was switched off (depends on the alt you run)...should be in the directions...Oh...FYI....when you turn on the headlights, the parklights will go out and only blink when the blinker is engaged....hope this helps some!!!....