The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

69ChevySB · 03-23-2003, 12:43 PM

my block is a 327 (or 307?), but my heads are from a 350 i know for sure. anyways, the fit is really really tight with my headers i could actually get all the bolts in, but then i tighten it, it wont go in all the way because the header is hitting the lower a-arm, should i just get a hammer and make a dent where the a-arm touches it, or should i just put another gasket to cover for the extra space, either way seems like it will work, but i don't know just wanted to get another opinion. thanks.

03-23-2003, 12:43 PM	#5
69ChevySB dropped69 Join Date: Jan 2003 Location: Grand Canyon State Posts: 120	my block is a 327 (or 307?), but my heads are from a 350 i know for sure. anyways, the fit is really really tight with my headers i could actually get all the bolts in, but then i tighten it, it wont go in all the way because the header is hitting the lower a-arm, should i just get a hammer and make a dent where the a-arm touches it, or should i just put another gasket to cover for the extra space, either way seems like it will work, but i don't know just wanted to get another opinion. thanks. __________________ "And yet I find, yet I find...repeating in my head. If I can't be my own, I feel better dead." -Layne Staley (R.I.P)