The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

crazy longhorn · 03-23-2003, 12:55 PM

if the interferance is with the a arm bushing(top edge,nut side),you could probably grind a little clearance on the nut.....just dont get too wild with the grinder. Good luck,crazyL

03-23-2003, 12:55 PM	#8
crazy longhorn Fabricate till you "puke" Join Date: Jun 2002 Location: Ill Posts: 9,402	if the interferance is with the a arm bushing(top edge,nut side),you could probably grind a little clearance on the nut.....just dont get too wild with the grinder. Good luck,crazyL