The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

KB71C10BBSUPER · 05-13-2009, 10:06 PM

Any glass shop can cut a new piece of glass and send it out to be tempered. Rear glass, Door glass & Vents. As dark as you want. They need to cut the holes in the vent glass pryor to having it tempered. I've had my done and several K5's. (they are all Flat Glass) You just need to pick out the degree of tint. Also when they scribe in the tempered bug, make sure it in the corner you want or have them leave it off. But check with your local trooper for what's allowed. Even though the tint is in the glass it will still not be approved glazing if it's to dark. Calif. only allows a low % tint on door glass and thats if the CHiP is not anal.

05-13-2009, 10:06 PM	#16
KB71C10BBSUPER Registered User Join Date: Apr 2009 Location: Valley Center, Ca. Posts: 37	Re: Rear Smoked Glass Any glass shop can cut a new piece of glass and send it out to be tempered. Rear glass, Door glass & Vents. As dark as you want. They need to cut the holes in the vent glass pryor to having it tempered. I've had my done and several K5's. (they are all Flat Glass) You just need to pick out the degree of tint. Also when they scribe in the tempered bug, make sure it in the corner you want or have them leave it off. But check with your local trooper for what's allowed. Even though the tint is in the glass it will still not be approved glazing if it's to dark. Calif. only allows a low % tint on door glass and thats if the CHiP is not anal.