The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

HighwayHum72 · 05-14-2009, 09:17 PM

check out Lunati's voodoo hydraulic flat tappets. i took the biggest one they had (pt # 60105) and stuffed it into my 350 w/ world sportsmans 64cc 200cc 9.5 cr, 3000 verter, 3.73's and i'm running 1.6 full rollers so the lift is up a bit. long story short...my truck is very very different now. in a good way. it idles at 950 in gear and the fun really starts at 2500 and i don't know where it ends yet. this is on chevron ca 91 octane pump gas with and edel 650 and dual plane and i use valvoline racing oil 50 with zinc- 3.99/qt at auto zone. I'd say Lunati's voodoo hyd ft cam are worth checking out for what you want. Have fun.

05-14-2009, 09:17 PM	#7
HighwayHum72 Registered User Join Date: Jul 2007 Location: Upland, CA Posts: 40	Re: 1.6 rockers and powerband check out Lunati's voodoo hydraulic flat tappets. i took the biggest one they had (pt # 60105) and stuffed it into my 350 w/ world sportsmans 64cc 200cc 9.5 cr, 3000 verter, 3.73's and i'm running 1.6 full rollers so the lift is up a bit. long story short...my truck is very very different now. in a good way. it idles at 950 in gear and the fun really starts at 2500 and i don't know where it ends yet. this is on chevron ca 91 octane pump gas with and edel 650 and dual plane and i use valvoline racing oil 50 with zinc- 3.99/qt at auto zone. I'd say Lunati's voodoo hyd ft cam are worth checking out for what you want. Have fun.