The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - WTB - ASAP - Good 3/4T 4WD spindles, 71-72

**special-K** · 05-20-2009, 06:14 AM

You should post your axle number off the tube.There were 1st & 2nd design in`72.The 1st design is the`71 part.That`s the tough one.Post the part number if you can read it.But,the axle number will tell which spindles you need.
What exactly is wrong with them?I had a problem with the threads and managed to dress enough with a tiny file.GM used an odd pitch and I coildn`t find a die or any thread file for the pitch.

05-20-2009, 06:14 AM	#4
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: WTB - ASAP - Good 3/4T 4WD spindles, 71-72 You should post your axle number off the tube.There were 1st & 2nd design in`72.The 1st design is the`71 part.That`s the tough one.Post the part number if you can read it.But,the axle number will tell which spindles you need. What exactly is wrong with them?I had a problem with the threads and managed to dress enough with a tiny file.GM used an odd pitch and I coildn`t find a die or any thread file for the pitch. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ Last edited by special-K; 05-20-2009 at 06:18 AM.