The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

cdowns · 05-20-2009, 08:45 AM

you should get new bearings you'll need different brake lines both hard and soft as well as mounting tabs on crossmember a different master cylinder and combination valve for the disc setup

i'd spend a day doing the drums and getting them finished and truck on road// you may be able to get the disc conversion done before you start school in the fall

05-20-2009, 08:45 AM	#13
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	Re: rebuild front drums or start to disc.. you should get new bearings you'll need different brake lines both hard and soft as well as mounting tabs on crossmember a different master cylinder and combination valve for the disc setup i'd spend a day doing the drums and getting them finished and truck on road// you may be able to get the disc conversion done before you start school in the fall __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY