Oh, Sorry
Here is a parts list from another post. The prices are accurate. If you have a set of calipers already, with the mounting brackets, you can save some money and get a set of rebuilt calipers locally for around $30-40 each. You will just have to swap the brackets over. I didn't check on the prices of the rotors local but I'm guessing you could get them pretty cheap too. I found a set of calipers in the junkyard for $13 each which saved me a little dough. If you don't run hard lines to the calipers you will need to get the Banjo bolt to attach the rubber lines. Another benefit of the junkyard. I picked up all the hardware at Tractor Supply, Ace Hardware has it too but they are more expensive.
1. Glock’s Camaro Brake Brackets - $95
2. 93-97 Rear Loaded Calipers –
www.RockAuto.com
a. Right A-1 CARDONE Part # 18B4540 (with mounting bracket) - $118.89 ($45 core)
b. Left A-1 CARDONE Part # 18B4541 (with mounting bracket) - $135.79 ($45 core)
3. Rear Rotors (94-96 Impala SS) –
www.RockAuto.com
a. RAYBESTOS Part # 56450R {Professional Grade} - $27.79 each - $55.58
4. 93-97 Camaro Rear Brake Lines –
www.RockAuto.com
a. (2) RAYBESTOS Part # BH380483 {Professional Grade} – (10.99 each) - $21.98
5. 93-97 Camaro Parking Brake Cable –
www.RockAuto.com
a. WAGNER Part # BC133076 - $21.89
6. Metric Brake Line Adapters –
www.gatewayfasteners.com – Part #1442 - $.99 each – $1.98
7. Disc/Disc Proportioning Valve - PVKS4 -
www.classicperform.com - more specifically -
http://www.classicperform.com/Store/...ruck/PVKS2.htm - $75
8. Hardware Needed:
a. (14) 3/8”-24x1-1/4” Grade 8 bolts – Tractor Supply Company – Bulk Bolts
b. (14) 3/8”-24 Grade C nuts – Tractor Supply Company – Bulk Bolts
c. (14) 3/8” hardened flat washers – Tractor Supply Company – Bulk Bolts
d. (4) M12-1.75x25mm Grade 10.9 Bolts
e. (8) M12 flat washers