|
Re: My tranny won't shift
CSB. look at the condition of the gear on the governor. If it looks like an "apple core" the governor is binding in the bore and has to be replaced. The other gear is on the output shaft and you have to remove the tailstock to get to it, then hold the clip down and tap the gear off with a hammer. The most common failure to shift in a 350 is vac modulator followed by detent cable and lastly by the governor or a valve body problem.
__________________
1984 K20 350M engine with 465,000 miles. Well, it's finally done!! Almost 2 years of work, but it was really worth the effort. Little stuff left to do is mount winch, wet sand & buff out and build belly pan\running boards. Body work takes lots and LOTS of beer!!!! God, Guts and Guns made America and God, Guts and Guns will preserve it! The worst thing you could do is get into my sights, but that don't matter, you'll never know it, cause you'll never hear the shot  Jim or Paladin whichever you choose.
|