The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

csb#356 · 05-28-2009, 12:07 AM

I tried turning the gear to get it to come out and it won't come out of there. I also don't know if it shifts by hand because i have the shift linkage hooked up wrong. oops. I get park, reverse, nuetral, drive, 2nd, and then the shifter won't actually pull all the way down into first after that. but its been like this ever since ive driven it. I also discovered that the tranny was to full so could this be the problem or would it have just ruined the seals.

05-28-2009, 12:07 AM	#6
csb#356 Registered User Join Date: May 2009 Location: Pinehurst, Idaho Posts: 311	Re: My tranny won't shift I tried turning the gear to get it to come out and it won't come out of there. I also don't know if it shifts by hand because i have the shift linkage hooked up wrong. oops. I get park, reverse, nuetral, drive, 2nd, and then the shifter won't actually pull all the way down into first after that. but its been like this ever since ive driven it. I also discovered that the tranny was to full so could this be the problem or would it have just ruined the seals. Last edited by csb#356; 05-28-2009 at 12:09 AM.