The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

68 short step · 05-31-2009, 10:41 PM

thanks everyone....i used a 4.25" OD roller on one radius of the fender and a 3" OD roller on the other (lower) radius.....the fan shroud, i used a brake.....
i used a combo of cutting tools, one was a plasma cutter and the other was a cut-off wheel

05-31-2009, 10:41 PM	#404
68 short step Senior Member Join Date: Aug 2005 Location: tulsa OK Posts: 3,070	Re: project INCREDIBLE HULK 6.2L with 6L80E thanks everyone....i used a 4.25" OD roller on one radius of the fender and a 3" OD roller on the other (lower) radius.....the fan shroud, i used a brake..... i used a combo of cutting tools, one was a plasma cutter and the other was a cut-off wheel Last edited by 68 short step; 05-31-2009 at 10:42 PM.