well, i just replaced a huge dent with new sheetmetal on my 67 suburban, where the 4th door would be. well, the original wreck bent the skin brace in a little and i didnt notice it til after i welded in the new piece. the metal kept kinda popping in when you touch it, so i took off the door panel and i noticed the skin is about an inch away from the brace, so it keeps popping in. i cant just pop the indented part out, so i have to figure out a way to get a spacer in between the skin brace and the sheetmetal. heres a pic from the inside with the panel off, lookin at the brace and sheetmetal.
[IMG]
[/IMG]
[IMG]
[/IMG]
please help if you have any ideas how to get this gap fixed in between the brace and metal.